5 profiles in this family · connectors
USB-C receptacles, JST signal headers, 2.54 mm board headers, XT60 power connectors, RJ45 jacks and Molex wire-to-board systems. Ratings here are thermal and mechanical as much as electrical, and the mating half is always a separate part number.
5 / 5 rows shown
| Part number | Package | Rating | Tolerance | Alts | Lifecycle | Added |
|---|---|---|---|---|---|---|
| 0039012040 Molex | Mini-Fit Jr receptacle housing, 4 circuits, 4.20 mm pitch | 600 V AC/DC, 9 A per circuit | Pitch ±0.1 mm; housing height ±0.3 mm | 3 | Active | 23 Sep 2026 |
| 61300211121 Wurth Elektronik | WR-PHD 2.54 mm pitch, 2-position vertical pin header | 250 V AC, 3 A per contact | Pitch ±0.1 mm over 2 positions; pin diameter 0.64 mm square | 2 | Active | 07 Oct 2026 |
| B2B-PH-K-S(LF)(SN) JST | PH series 2.0 mm pitch, 2-position vertical header | 100 V AC/DC, 2 A per contact | Pitch ±0.05 mm; contact position ±0.1 mm | 3 | Active | 18 Aug 2026 |
| RJHSE-5380 Amphenol ICC | RJ45 jack, 8P8C, right-angle shielded with LEDs | 125 V AC, 1.5 A per contact | Contact position ±0.15 mm; shield tab position ±0.2 mm | 3 | Active | 20 Oct 2026 |
| USB4085-GF-A GCT (Global Connector Technology) | USB Type-C receptacle, 16 contacts, SMD with through-hole shell tabs | 20 V DC, 5 A per group | Contact position ±0.05 mm; insertion force 5-20 N | 3 | Active | 02 Sep 2026 |
No published profile matches the current filters.
Facts for cross-checking
| Family slug | connectors |
|---|---|
| Profiles published | 5 |
| Packages covered | Mini-Fit Jr receptacle housing, 4 circuits, 4.20 mm pitch · WR-PHD 2.54 mm pitch, 2-position vertical pin header · PH series 2.0 mm pitch, 2-position vertical header · RJ45 jack, 8P8C, right-angle shielded with LEDs · USB Type-C receptacle, 16 contacts, SMD with through-hole shell tabs |
| Lifecycle states present | active |
| Oldest / newest profile | 2026-08-18 → 2026-10-20 |
| Canonical family URL | https://gathered.top/parts/connectors |
Engineering information only. Verify every substitution against the manufacturer datasheet and your own operating conditions before committing a design.